Parameters：

Voltage:12V

Power connecting: red wire to "12V+",  black wire to "12V-"< br>

Power consumption:12W/m Total 60W

Strip width:10mm

Waterproof: Not waterproof

Light Wavelength:395nm-410nm

Light beads: 300pcs

Single lamp bead lumens: 13 (lm)

LED bead cutting: Every 3 lights can be cut (5cm)

Enclosure Material: Oxford cloth, aluminum reflective sheet and fiberglass support bar

Transparent model seat Material: acrylic

Package including

DIY Enclosure kit*1

UV LED light strip*3<

Branch cable*1

Brightness controller*1

Power Adaptor*12V 5A*1

DIY Transparent Model Seat*1

Socket timer(Optional) Due to different model need different curing time, so timer is not a must, user need to control curing time according to own experience, if you really need a time, can order a socket timer

1【 Huge Curing Space ,Maximum to 350*350*400mm (13*13*15inch)】 Compatible for 15.6 inch or less LCD printer's work to use.

2【Free to Adjust Lighting Direction】With 3 branches LED UV light strips  free to stick onto reflective aluminium sheet , you can adjust the lighting direction freely, put model to be cured on the transparent seat, the model could get curing light from 360 degree full direction , make after curing more even and no dead corner. 

3【Light Brightness Adjustable ,300 lighting beads, 60W Power Consumption 】With a light brightness adjust switch to control brightness, to do better after curing, different model need different UV light intensity, if you not in a hurry, can let curing more gently, if you are catching time, can curing it faster by maximum brightness.

4【Easy to assemble 】 Follow the instruction picture,  only need about 10 to 20 minutes, you can finish assemble very easily .

5【 See-through Window and Front Open Door】A see-through window assists you to observe the curing process,with dark window to filter UV light and anti-leak zipper to minimum UV light leakage so can protect your eyes. Front open door is more convenient to put in and take out models